Rail Fastening Systems and Cast Spindles Manufacturer for Jiangnao Railway

From 2021 to 2022, Anyang Railway Equipment Co., Ltd. will provide type I rail clip fastener assemblies, type II rail clip fastener assemblies as well and railway rail fishplate, fishbolts to the newly built Jingye Group railway special line.

During 2019-2021, Anyang Railway Equipment Co., Ltd. provided China-Laos Railway with 848,262 sets of type II rail fastening system for 60kg/m steel rail (used in general area), 153,345 sets of special rail fastening system for wheel guard rails (according to the design drawings of special line 3448), and 120,322 sets of type I rail fastening system (used in acid area ), 73 tons of bridge pier hanging fence (including angle steel, backing plate, M20 bolts, M16 nuts), 2000 pieces of P60 rail joints.

Anyang Railway Equipment Co., Ltd. has been providing high-strength joint bolts and nuts, T-bolts, high-strength nuts, single-coil spring washers, and flat washers to Xinjiang Xintie Industrial Equipment Co., Ltd from 2021 to 2022.

From 2021 to 2022, Anyang Railway Equipment Co., Ltd. Has been providing the rail clips, flat washers, screws spikes, gauge baffle plates, nylon baffle seats to Guangxi Coastal Railway Co., Ltd. to the expansion and transformation of the Qingang branch railway.

In 2021, Anyang Railway Equipment provided 53,000 pieces of 6# gauge plates and 53,000 pieces of 10# gauge plates to the Yan’an and Suide sections of Baoxi Railway for the rail change project.

 In 2019, China Railway Jinan Bureau Group Co., Ltd. ordered P60 small resistance fasteners, intermediate guard rail anchors, joint guard rail anchors, guard rail gusset, intermediate guard rail gusset, joint guard rail gussets, guard rail rubber pads, intermediate guard rail anchors, joint guard rail anchors, guard rail spindles from Anyang Railway Equipment Co., Ltd.

Anyang Railway Equipment will provide 386,581 sets of Type-II Rail Fastening Systems to the Aksu-Alar Railway in 2021.

In 2017, Anyang Railway Equipment Co., Ltd. provided 50kg and 60kg Type I Fastening System, 60kg Type II Fastening System, 60kg Type III low-resistance elastic railway fastener assembly, new type III 50kg guard rail fastening system to the Shugang Railway in Dongjiakou Port Area requirements), a total of 230,476 sets of fastener systems.

In 2021, Anyang Railway Equipment Co., Ltd. provided 35,380 sets of 50kg/m Type-I rail elastic clip fastening system and 100 sets of 60kg/m Type-II rail elastic clip fastening system to the special line project of Dongying Mingsheng Railway Logistics Park.

In 2021, Anyang Railway Equipment Co., Ltd. provided 3080 sets of type I clip fastener assembly for 50kg/m rail and 6098 sets of type II clip fastener assembly for 60kg/m rail for the reconstruction project of the Harbin-Jiamusi Wangsun Uplink Super Bridge.

In 2014, Anyang Railway Equipment Co., Ltd(AT) provided 60-50kg/m rail special-shaped rail joint fittings(railway fishplates, joint bolts, nuts, spring washers), 50kg/m and 60kg/m ordinary rail joint fittings and rail guard fittings to Tianjin-Baoding Railway.

In 2022, Anyang Railway Equipment Co., Ltd. will provide 700,000 Pcs of M24*195 anti-corrosion screws, 700,000 Pcs of M24 anti-corrosion nuts, and 7,316 sets of 60kg/m rail clip fastener systems (for support blocks) and 898 sets of 60kg/m II rail clip fastening systems for the entire set of turnout overhaul accessories and daily production and maintenance to China Railway Shenyang Bureau Group Co., Ltd.

From 2021 to 2022, Anyang Railway Equipment Co., Ltd. has been providing 85,816 sets of I-type general-speed fastening system for 50kg/m rail to the Jinhua-Ningbo railway, the rail fastening system will implement Q/CR563-2017 Standard.

In 2022, Anyang Railway Equipment Co., Ltd（AT）provided regular joint fishplates and insulating joint fishplates for 43kg/m, 50kg/km and 60kg/m steel rails as well as compromise joint fishplates for 43-50kg/m, 50-60kg/m steel rails, expansion railway fishplates for 50kg/m and 60kg/m steel rails to Hohhot Railway Bureau Hohhot Public Works Section.

In 2018, Anyang Railway Equipment Co., Ltd. provided 50kg I-type general-speed rail fastener systems and 60kg I-type general-speed fasteners, 60kg II-type general-speed rail fastener systems to Yungui Railway.

Anyang Railway Equipment Co., Ltd. provided a large number of 50kg Type-I Rail Fastener System for 50kg/m steel rail, Type-II Rail Fastener System for 60kg/m steel rail, Type DJK5-1 Rail Fastener System for the Mombasa-Nairobi Railway project.

In 2022, Anyang Railway Equipment Co., Ltd supplied 22,090 sets of 60kg Type II (general area) general-speed rail fastening systems to the Guiyang-Nanning Railway for the Guiyang Hub Project.

In 2021, Anyang Railway Equipment Co., Ltd. provided P60 railway rail joint bars, P50 railway rail joint bars, P50 track fastener assemblies, P50 track fastener assemblies for guard rail and spindles, turnout spindles to the newly constructed Jingye Group Railway Special Line.

In 2020, Anyang Railway Equipment Co., Ltd. provided Nanlong Railway with a combination of 50kg/m rail joint splint and M24*145 rail bolts (intensity grade 8.8) with ut, φ24 single coil spring washers and 50kg/m ordinary insulation rail joints (each set of insulation rail joint combination includes 2 insulation joint bars, 6 sets of rail bolts with nuts, 6 pcs of single-coil spring washer, 12 pcs of flat washers, etc).

Anyang Railway Equipment Co., Ltd provided a total of 2,795,976 sets of rail fastening systems and 127,895 pcs of rubber products for Hotan-Ruoqiang Railway, Golmud-Korla railway, and Southern Xinjiang Railway.

Anyang Railway Equipment Co., Ltd. has been providing railway fastening products such as rail tension clamps(rail clip), screw spikes, gauge baffles, nylon baffle seats, and under-rail rubber pads for the railway reconstruction project of Fangchenggang Station.

In 2021, Anyang Railway Co., Ltd. provided China Railway Beijing Bureau Group Co., Ltd. with 73,350 pieces of 529, 845 pieces of various types of gauge baffles, all the gauge baffle plates are made of Q235A, according to the TB∕T1495.3 standard.

In 2022, Anyang Railway Equipment Co., Ltd. will provide 271 tons of hanging fence processing parts including angle steel, round steel, patterned steel plate, special-shaped patterned steel plate, special-shaped patterned steel plate, etc. in the construction of bridge piers.

In 2021, Anyang Railway Equipment Co., Ltd supplied 3080 sets of Type-I clip fastening system used for 50kg/m rails to the new Harbin to Mudanjiang Wangzhaotun power supply and maintenance train depot project.

In 2016, Anyang Railway Equipment provided 50kg Type I Railway Fastener System (adopted TB/T1495 “Type I Fastening System” standard) and 60kg Type I Railway Fastener System (adopted TB/T1495 “Type I Fastening System” standard),60kg Type II Railway Fastener System (using TBT/3065-2001 and TB/T1495 “Type II Fastening System” standard), 60kg Type III Railway Fastener System (technical requirements of railway rail clips fastening system for Special Line (01) 3328).

In 2017, Anyang Railway Equipment Co., Ltd(AT) provided P50 and P60 common rail fishplates, bonded insulating gauge rods, single coil spring washers, insulating joint bolts and nuts for China Railway Urumqi Bureau Group Co., Ltd.

Anyang Railway Equipment Co., Ltd. provided China-Laos Railway with type II rail fastening system, special rail fastening system for wheel guard rails, type I rail fastening system, bridge pier hanging fence, backing plate, 2000 pieces of P60 rail joints.

in 2020, Anyang Railway Equipment Co., Ltd. provided 129,578 sets of rail fastener system for the guard rail wheel, 266 sets of spindles and accessories for the guard rail wheel to Quning Railway.

In 2020, Anyang Railway Equipment provided 103,163 pcs of 6# gauge baffles, 103,163 pcs of 10# gauge baffles, 206,326 pcs of Type II track tension clips, 207,352 pcs of flat washers and 207,352 pcs of nut for seamless steel rail regulation in Xi’an-Pingliang Railway.

In 2022, Anyang Railway Equipment Co., Ltd. supplied 11141 sets of guard rail fastening systems and 45 sets of cast guard rail spindles to Jiangnao Railway.