CK-1 and DTIII2 Fastening Systems Manufacturer

Rail joints connect two adjacent (end to end) rails. Starting in the 1810s, 45°or 60°miter joints were used. Then, as an improvement, scarf joints were developed; the two rail ends were notched and bolted together. Splice joints were invented in the United States around 1830 and led to the development of angled joint bars in the 1850s. Angled joint bar design spread quickly, was adopted worldwide, and became the standard that has endured to the present.

In 2020-2011, Anyang Railway Equipment Co., Ltd(AT) provided M30 Tunnel Segment Bolts for Chengdu Metro Line 10 and Chengdu Metro Line 13.

 Anyang Railway Equipment Co., Ltd(AT). provided 50kg/m railway fishplates and 24*145 high-strength fishplate bolts with nuts and single-coil spring washers to Yangan Railway.

Anyang Railway Equipment Co., Ltd. as the main supplier of railroad materials in the Benguela Railway Project, provided 80% of railway construction materials for 3000km railroads in Angola, we mainly provided elastic rail clips, joint bars, insulated joint bars, gauge tie rods, gauge plates, etc.

From 2019 to 2020, Anyang Railway Equipment Co., Ltd. provided 60kg/m railway fishplates(rail joint bars), fishbolts with nuts and plum-shaped washers to Shanghai Metro Line 18.

In December 2021, Anyang Railway Equipment Co., Ltd. provided various railway rail fastening products(DT-Ⅲ Rail Fastening System, DT-Ⅲ Low Resistance Rail Fastening System, DJK5-1 Rail Fastening System, Type-I Rail Fastening System, WJ-2A Rail Fastening System) to the first phase of Guiyang Rail Transit Line 3.

In 2018, Anyang Railway Equipment Co., Ltd. provided Type III split railway fastener assembly, Type I split railway fastener assembly,  Type I railway fastener assembly, Type II inspection pit fastening system, DJK5-1 fastening system, 60kg/m ordinary rail joint bars, 60kg/m frozen rail joint bars, 50kg/m non-working side shock-absorbing rail joint bars, 60kg/m non-working side shock-absorbing rail joint bars, bulging fishplates. to Zhengzhou Metro.

In 2017, Anyang Railway Equipment Co., Ltd（AT）provided 50kg/km common joint fishplates to Hohhot Railway Bureau Hohhot Public Works Section.

In 2024, Anyang Railway Equipment Co., Ltd. provided 60,000 sets of Type III split fastening systems to the Xi’an Metro Line 15 track laying project.

In 2022, Anyang Railway Equipment Co., Ltd. provided 572 sets of P60 frozen joint bars for Zhengzhou Metro Line 12.

In 2022, Anyang Railway Equipment Co., Ltd. provided 620 sets of joint bars for 60kg/m railway rails and 895 sets of joint bars for 50kg/m railway rails to Guangzhou Metro Line 12.

In 2024, Anyang Railway Equipment Co., Ltd. provided 6,700 sets of new Type III bridge sleepers P50 guardrail fastening systems to the Hanzhong Maintenance Section of Xi’an Bureau Group Corporation.

In 2021, Anyang Railway Equipment Co., Ltd. provided 25,000 sets of M27 shield tunnel segment bolts to the trunk canal of Chuhe Grade 4 Station. 

In 2024, Anyang Railway Equipment Co., Ltd. provided 10,084 pieces of 190*149*10mm rubber pads to China Railway First Bureau Group Co., Ltd.

In 2021, Anyang Railway Equipment Co., Ltd. provided 16,128 sets of guard rail fastener systems and 41 sets of rail spindles to the Yongxin Railway Special Line.

In 2017, Anyang Railway Equipment Co., Ltd(AT) provided double-head six-hole rail splice bar(rail fishplates) used for 50kg/m and 60kg/m rail in the newly built Golmud-Korla Railway Xinjiang Section.

In 2024, Anyang Railway Equipment Co., Ltd provided China Railway Qinghai-Tibet Group Co., Ltd. with rail ordinary joint bars, track bolts, rail insulating joint bars, insulated fishbolts, nuts, flat washers.

In 2018, Anyang Railway Equipment Co., Ltd. provided spring V-type rail fasteners, III-type rail shock absorber fasteners, WJ-2A rail fasteners, and I-type elastic clip fasteners, DJK5-1 rail fasteners, type II inspection pit rail fasteners, rail fasteners for turnouts, a total of 185,398 sets of track fastener assembly.

In 2019, Anyang Railway Equipment Co., Ltd. provided regular 50kg/m railway rail joint bars, regular 60kg/m railway rail joint bars, 60kg/m railway bulge(joggled) rail joint bars, 60kg/m rail frozen joint bars, and 50kg/m high-strength rail joint bolts, 60kg/m high-strength rail joint bolts to Shijiazhuang Metro Line 2.

In 2022, Anyang Railway Equipment Co., Ltd. provided 17,250 pieces of railroad track joint bars to China Railway Beijing Bureau Group Co., Ltd. The products were carried out TB/T2345-2008 .

In 2016, Anyang Railway Equipment Co., Ltd. provided P60 railway fishplates, M24*135mm fishbolts with cap, 9*26mm single-coil spring washer, P50 railway fishplate, M24*145mm fishbolts with cap,φ32mm insulated gauge rod, 60kg/m rail pin type anti-climbing device to the III phase project to Shanghai Metro Line 9. 

Anyang Railway Equipment Co., Ltd. provided UIC60E1 fishplates, QU100 rail joint bars, pressure plates, tie pads, rubber pads and other railway construction materials for the Zamyn-Ude Logistics Park project in Mongolia.

From 2021 to 2022, Anyang Railway Equipment Co., Ltd. will provide Type-II Divided Rail Clip Fastening Systems to the West Ring Road of Changzhou-Zhuzhou-Tanzhou Intercity Rail Transit. Each set of Type-II Divided Rail Clip Fastening System includes iron pad, rubber pad, rail clip, anchor bolts, nuts, washers, nylon dowel, insulating gauge block, etc.

In 2024, Anyang Railway Equipment Co., Ltd. provided 54,564 pcs of Type I T-bolts, 54,564 pcs of Type I gauge baffles, 54,564 pcs of Type I cap nuts and 54,564 pcs of Type I elastic rail clips to China Railway Wuhan Bureau Group Co., Ltd.

In 2021, Anyang Railway Equipment Co., Ltd. provided ordinary fishplates and insulating joint splints, rubber pads used under rail, A-type rail tension clips, B-type rail tension clips to Qujing Works Section of China Railway Kunming Bureau Group Co., Ltd.

In 2021, Anyang Railway Equipment Co., Ltd. provided 4,000 sets of M30 Tunnel segment bolts to II phase of Chengdu Metro Line 17.

In 2021, Anyang Railway Equipment Co., Ltd. supplied 90,000 sets of WJ-14 rail fastening systems(rail fasteners) to Shenzhen Metro Line.

In 2019, Anyang Railway Equipment Co., Ltd. provided 19,600 sets of railway fastener assembly for P50 check rail, and 22 sets of joint spindles for P50 check rail to the Beijing-Xiong Intercity Railway.

In 2017, Anyang Railway Equipment Co., Ltd. provided 50kg/m I-type rail clip fastener system, 60kg/m I-type rail clip fastener system, 60kg II-type elastic fastener system and new III bridge 50kg/m guard rail fastener system to Wuhan Xingang Jiangbei Railway, a total of 240,363 sets of various rail fastener systems.

In 2016, Anyang Railway Equipment Co., Ltd. provided Changsha Metro Line 3 with 173,000 Pcs cast-iron tie plates and 346,000 Pcs gauge-adjusting gussets, both of them were made of QT450-10.