Rubber Pads of Rail Fastening System Used Under Track for Daqin Railway

In 2022, Anyang Railway Equipment Co., Ltd. has been providing embedded U-bolts, ballast steel plates, tie plates, etc for the capacity expansion and reconstruction project of the Emei-Miyi section of the Chengdu-Kunming Railway.

During 2019-2021, Anyang Railway Equipment Co., Ltd. provided China-Laos Railway with 848,262 sets of type II rail fastening system for 60kg/m steel rail (used in general area), 153,345 sets of special rail fastening system for wheel guard rails (according to the design drawings of special line 3448), and 120,322 sets of type I rail fastening system (used in acid area ), 73 tons of bridge pier hanging fence (including angle steel, backing plate, M20 bolts, M16 nuts), 2000 pieces of P60 rail joints.

In 2016, Anyang Railway Equipment Co., Ltd（AT）provided 43kg/km, 50kg/km, 60kg/km common joint fishplate and insulating joint fishplate and 60kg/km rail broken emergency splice bars (expansion splint), 43-50kg/km and 50-60kg/km special-shaped joint splint to China Railway Wuhan Bureau Group Co., Ltd.

In 2018, Anyang Railway Equipment Co., Ltd provided kinds of Screw Spikes, Nuts, Washers, Fishplates, Joint Bolts, Gauge Baffles, Gauge Tie Rods for Qinghai-Tibet Railway

In 2019, Anyang Railway Equipment Co., Ltd. provided rail clips, gauge baffles, rail spikes, nuts, plain washers to the Huaihua Railway.

In 2019, Anyang Railway Equipment Co., Ltd. provided protect rail spindles and protect rail fastening systems for the Yang’an Second Railway, which were used for P60/m steel rails, with type IIIa concrete sleepers.

In 2021, Anyang Railway Equipment provided 53,000 pieces of 6# gauge plates and 53,000 pieces of 10# gauge plates to the Yan’an and Suide sections of Baoxi Railway for the rail change project.

From 2020-2021, Anyang Railway Equipment Co., Ltd. provided 108,196 sets of Type-II rail clip fastening system and Type-III rail clip fastening system used for 60kg/m steel rail to the repair and safety reinforcement of the equipment safety reinforcement project of the Wujiang Line.

in 2020, Anyang Railway Equipment Co., Ltd. provided 129,578 sets of rail fastener system for the guard rail wheel, 266 sets of spindles and accessories for the guard rail wheel to Quning Railway.

In 2020, Anyang Railway Equipment provided 103,163 pcs of 6# gauge baffles, 103,163 pcs of 10# gauge baffles, 206,326 pcs of Type II track tension clips, 207,352 pcs of flat washers and 207,352 pcs of nut for seamless steel rail regulation in Xi’an-Pingliang Railway.

In 2021, Anyang Railway Equipment Co., Ltd. provided 100,000 pieces of 10×149×185 rubber pads used for under-track, 3,144 sets of M24×135 high-strength joint bolts and nuts, and 3,144 pieces of single-coil spring washers to China Railway Urumqi Bureau Group Co., Ltd. 

In 2021, Anyang Railway Equipment Co., Ltd. provided Shanghai Railway Group Co., Ltd with a total of 14,220 pcs of railroad fishplates, including 120 pieces of 43kg/m rail regular railroad fishplates, 7000 pcs of 50kg/m rail regular railroad fishplates, and 7100 pcs of 60kg/m rail regular railroad fishplates used for the maintenance of rails.

In 2021, Anyang Railway Equipment Co., Ltd. provided P60 railway rail joint bars, P50 railway rail joint bars, P50 track fastener assemblies, P50 track fastener assemblies for guard rail and spindles, turnout spindles to the newly constructed Jingye Group Railway Special Line.

In 2016, Anyang Railway Equipment Co., Ltd. provided 50kg Type I Fastening System, 60kg ballastless transition Auxiliary rail fasteners, rail fastener, 60kg Type II Fastening System, a total of 126,334 sets of railway fastener systems to the Beijing-Shenyang railway passenger dedicated line.

In 2021, Anyang Railway Equipment provided 386,581 sets of Type II rail elastic clip Fastening Systems to the Aksu-Alar Railway.

In 2016, Anyang Railway Equipment Co., Ltd. provided 50kg I-type rail fastener system (according to TB/T 1495 standard), 60kg II-type rail fastener system (according to special line 3351), 60kg III-type rail fastener system for the electrification reconstruction project of Wuhu-Guangde Railway (according to the dedicated line (01) 3328).

In 2022, Anyang Railway Equipment Co., Ltd provided Rail Joint Bars, Joint Bolts, Nuts, Rail Fastening Systems, and Spindles to Liugou-Hongshaliang Railway.

In 2022, China Railway Second Bureau Group Xinyun Engineering Co., Ltd. will operate and maintain the Xinshuo railway, and Anyang Railway Equipment Co., Ltd. provided 39,600 sets intermediate fastening systems (with type-II rail elastic clips) and 1,250 sets of joint fastening systems (with type-II rail elastic clips) for the project. ) connector fasteners for P60 rails.

In 2020, Anyang Railway Equipment Co., Ltd. provided 32,000 sets of tunnel segment bolts, grade 5.8 for Zengcheng South Railway.

In 2017, Anyang Railway Equipment Co., Ltd(AT) provided P50 and P60 common rail fishplates, bonded insulating gauge rods, single coil spring washers, insulating joint bolts and nuts for China Railway Urumqi Bureau Group Co., Ltd.

In 2018, Anyang Railway Equipment Co., Ltd. provided P50 fishplate and 24*145 fishtail bolts for Afghan Railway.

Anyang Railway Equipment Co., Ltd. provided a large number of 50kg Type-I Rail Fastener System for 50kg/m steel rail, Type-II Rail Fastener System for 60kg/m steel rail, Type DJK5-1 Rail Fastener System for the Mombasa-Nairobi Railway project.

Anyang Railway Equipment Co., Ltd. provided 5,155 sets of Type II Rail Fastening System to Baocheng Line K227 geological disaster remediation and rerouting project in 2021. Each set of Type II Rail Fastening System includes screw spikes, rail clips, nuts, washers, gauge baffle plates, rubber pads, nylon baffle seats, etc.

In 2017, Anyang Railway Equipment Co., Ltd(AT) provided 50kg/m and 60kg/m rail fishplates and M24*135 bolts to Nanping-Longyan Railway.

Anyang Railway Co., Ltd. provided 6# and 10# anti-corrosion gauge baffle plates for the overhaul and track change plan for China Railway Wuhan Bureau Group Co., Ltd, with a total of 1.1 million pieces.

In 2021, Anyang Railway Equipment Co., Ltd. provided 3080 sets of type I clip fastener assembly for 50kg/m rail and 6098 sets of type II clip fastener assembly for 60kg/m rail for the reconstruction project of the Harbin-Jiamusi Wangsun Uplink Super Bridge.

Anyang Railway Equipment Co., Ltd provided P50 rail clip fastening systems, guard rail fasteners, bridge sleeper guard rail fasteners, spindles, and other railway equipment for Nariobi-Malaba Railway Project in Kenya.

Anyang Railway Equipment Co., Ltd. provided Heavy-Load Rail Fastening System, Guard Rail Fastening Systems, Joint Bars, Guard Rail Spindles, Nylon Insulator, Plastic Dowel, Spring Washer, etc for Haoji Railway.

In 2021, Anyang Railway Equipment Co., Ltd. supplied 2110 sets of 50kg/m I-type track fastener assembly, 1332 pieces of 50kg/m rail splice bars, and 3996 sets of M24*145 joint bolts to Shougang Jingtang Iron and Steel Co., Ltd.

In 2018, Anyang Railway Equipment Co., Ltd. provided 60kg/m glued insulated fishplates, reinforced ordinary insulated fishplates to Shanxi Yuneng Xinghe Railway Special Line.