Regular Joint Bars, Insulated Joint Bars, Compromise Joint Bars for 43kg/m, 50kg/m, 60kg/m Railway Rail

In 2022, Anyang Railway Equipment Co., Ltd. will provide 13,000 sets of I-type track fastening system, 1,300 sets of 50kg/m rail joint bars as well as accessories (with bolts and spring washers) and 375 pcs of gauge tie rods to the Changsha Xingang railway (Phase III).

From 2011 to 2022, Anyang Railway Equipment Co., Ltd. has been providing 95,046 sets of 50kg/m type-I rail fastener assemblies and 174,441 sets of 60kg/m type-I rail fastener assemblies to the Xuyong-Bijie Railway.

Anyang Railway Equipment Co., Ltd. provided a large number of 50kg Type-I Rail Fastener System for 50kg/m steel rail, Type-II Rail Fastener System for 60kg/m steel rail, Type DJK5-1 Rail Fastener System for the Mombasa-Nairobi Railway project.

In 2022, Anyang Railway Equipment Co., Ltd. will provide 700,000 Pcs of M24*195 anti-corrosion screws, 700,000 Pcs of M24 anti-corrosion nuts, and 7,316 sets of 60kg/m rail clip fastener systems (for support blocks) and 898 sets of 60kg/m II rail clip fastening systems for the entire set of turnout overhaul accessories and daily production and maintenance to China Railway Shenyang Bureau Group Co., Ltd.

In 2019, Anyang Railway Equipment Co., Ltd. provided rail clips, gauge baffles, rail spikes, nuts, plain washers to the Huaihua Railway.

In 2022, Anyang Railway Equipment Co., Ltd. has been providing embedded U-bolts, ballast steel plates, tie plates, etc for the capacity expansion and reconstruction project of the Emei-Miyi section of the Chengdu-Kunming Railway.

In 2020, Anyang Railway Equipment provided 103,163 pcs of 6# gauge baffles, 103,163 pcs of 10# gauge baffles, 206,326 pcs of Type II track tension clips, 207,352 pcs of flat washers and 207,352 pcs of nut for seamless steel rail regulation in Xi’an-Pingliang Railway.

Anyang Railway Equipment will provide 386,581 sets of Type-II Rail Fastening Systems to the Aksu-Alar Railway in 2021.

In 2017, Anyang Railway Equipment Co., Ltd(AT) provided P50 and P60 common rail fishplates, bonded insulating gauge rods, single coil spring washers, insulating joint bolts and nuts for China Railway Urumqi Bureau Group Co., Ltd.

From 2021 to 2022, Anyang Railway Equipment Co., Ltd. has been providing 2,580,000 pieces of type-II rail elastic clips to China Railway Guangzhou Bureau Group Co., Ltd, which are used for passenger and freight railroads.

During 2019-2021, Anyang Railway Equipment Co., Ltd. provided China-Laos Railway with 848,262 sets of type II rail fastening system for 60kg/m steel rail (used in general area), 153,345 sets of special rail fastening system for wheel guard rails (according to the design drawings of special line 3448), and 120,322 sets of type I rail fastening system (used in acid area ), 73 tons of bridge pier hanging fence (including angle steel, backing plate, M20 bolts, M16 nuts), 2000 pieces of P60 rail joints.

In 2019, Anyang Railway Equipment Co., Ltd. provided rail joint splints, joint bolts with caps, spring washers, I-type rail spring clip assemblies, insulating joint bars, insulating joint bolts with caps, and insulating spring washers to Handan-Huangzhou Railway.

In 2021, Anyang Railway Equipment Co., Ltd supplied 3080 sets of Type-I clip fastening system used for 50kg/m rails to the new Harbin to Mudanjiang Wangzhaotun power supply and maintenance train depot project.

In 2022, Anyang Railway Equipment Co., Ltd. provided 10125 sets of normal railway fastening systems and 1016 sets of joint fastening systems and 45 cast spindles to the Jiangnao Railway.

In 2017, Anyang Railway Equipment Co., Ltd（AT）provided 50kg/km common joint fishplates to Hohhot Railway Bureau Hohhot Public Works Section.

In 2021, Anyang Railway Equipment Co., Ltd. provided 16,128 sets of guard rail fastener systems and 41 sets of rail spindles to the Yongxin Railway Special Line.

In 2021, Anyang Railway Equipment Co., Ltd. provided Guangzhou Metro Line 11 with 950 sets of damping joint bars for 50kg/m rail, 40 sets of damping joint bars for 60kg/m rail, and 60 sets of regular joint bars for 50kg /m rail and 1036 sets of regular joint bars for 60kg/m rail.

In 2017, Anyang Railway Equipment Co., Ltd(AT) provided P60 type III sleeper fastening accessories, P50 sleeper fastening accessories, rail fastening accessories on the bridge, rail tie rods to Xuyu Railway.

In 2017, Anyang Railway Equipment Co., Ltd. provided 50kg and 60kg Type I Fastening System, 60kg Type II Fastening System, 60kg Type III low-resistance elastic railway fastener assembly, new type III 50kg guard rail fastening system to the Shugang Railway in Dongjiakou Port Area requirements), a total of 230,476 sets of fastener systems.

From 2021 to 2022, Anyang Railway Equipment Co., Ltd. has been providing 85,816 sets of I-type general-speed fastening system for 50kg/m rail to the Jinhua-Ningbo railway, the rail fastening system will implement Q/CR563-2017 Standard.

In 2021, Anyang Railway Equipment Co., Ltd. provided 35,380 sets of 50kg/m Type-I rail elastic clip fastening system and 100 sets of 60kg/m Type-II rail elastic clip fastening system to the special line project of Dongying Mingsheng Railway Logistics Park.

In 2021, Anyang Railway Equipment provided rail joints(includes railway fishplates, joint bolts and spring washers) as well as the Type-I rail fastening systems for 50kg/m rails to Manzhouli Railway International Cargo Yard.

In 2016, Anyang Railway Equipment Co., Ltd（AT）provided 43kg/km, 50kg/km, 60kg/km common joint fishplate and insulating joint fishplate and 60kg/km rail broken emergency splice bars (expansion splint), 43-50kg/km and 50-60kg/km special-shaped joint splint to China Railway Wuhan Bureau Group Co., Ltd.

In 2021, Anyang Railway Equipment Co., Ltd. provided ordinary fishplates and insulating joint splints, rubber pads used under rail, A-type rail tension clips, B-type rail tension clips to Qujing Works Section of China Railway Kunming Bureau Group Co., Ltd.

In 2018, Anyang Railway Equipment Co., Ltd(AT) provided P50 and P60 rail joint splints(railway fishplates) to Jingshen Railway.

From 2020-2021, Anyang Railway Equipment Co., Ltd. provided 108,196 sets of Type-II rail clip fastening system and Type-III rail clip fastening system used for 60kg/m steel rail to the repair and safety reinforcement of the equipment safety reinforcement project of the Wujiang Line.

From 2018 to 2021, Anyang Railway Equipment Co., Ltd. provided 1,108,532 sets of 60kg Type II ordinary railway fastening systems, 263,892 sets of 50kg Type I ordinary railway fastening systems, and 60kg ballastless transition section auxiliary to the East Ring Road of Chongqing Railway Hub Rail fasteners, a total of 157316 sets of the rail fastener assembly.

In 2020, Anyang Railway Equipment Co., Ltd. provided 22,450 sets of 24*195 screw spikes and M24 Nuts to the Longhai Railway.

In 2022, Anyang Railway Equipment Co., Ltd supplied 29,832 sets of 50kg I-type fastening systems (used in general areas) to the reconstruction of the railway Hulin branch line

In 2021, Anyang Railway Equipment Co., Ltd. provided 100,000 pieces of 10×149×185 rubber pads used for under-track, 3,144 sets of M24×135 high-strength joint bolts and nuts, and 3,144 pieces of single-coil spring washers to China Railway Urumqi Bureau Group Co., Ltd.