P50 Check Rail Railway Fastener Assembly and Joint Spindles for Beijing-Xiong Intercity Railway

In 2019, Anyang Railway Equipment Co., Ltd. provided 100,000 cast-iron tie plates (used for DTIII type rail fastener systems) to Shenzhen Metro Line 10.

In 2021, Anyang Railway Equipment Co., Ltd. supplied 90,000 sets of WJ-14 rail fastening systems(rail fasteners) to Shenzhen Metro Line.

In 2019, Anyang Railway Equipment Co., Ltd. provided DTVI2 railway rail fastener systems, P60 frozen rail joints, regular rail fishplates, P60 high-strength rail bolts with nuts, spring washers, P60 bulging rail fishplates, gauge insulating rods, fine gauge block, and height-adjusting pads under tie plates and height-adjusting pads under rails to Chongqing Metro Line 9.

In 2018 and 2019, Anyang Railway Equipment Co., Ltd. provided M24 segment tunnel bolts with the length of 1.5m and 1.2m, strength grade 8.8 hot-dip galvanizing to Guangzhou Metro Line 11.

In 2019, Anyang Railway Equipment Co., Ltd(AT) provided M30 Tunnel Segment Bolts for Xiamen Metro Line 4.

In 2020, Anyang Railway Equipment Co., Ltd. provided 90 sets of 60kg/m shock-absorbing rail joint bars and 210 sets of 50kg/m damper railway fishplates to Zhengzhou Metro Line 3.

In 2022, Anyang Railway Equipment Co., Ltd. supplied DZIII and CZI fastener systems to the first phase project of Chengdu Rail Transit Line 30.

In 2019, Anyang Railway Equipment Co., Ltd provided DTVI2 rail fastening system for Harbin Metro Line 2.

In 2021, Anyang Railway Equipment Co., Ltd. provided Shenzhen Metro Line 3 with 198548 sets of M27 shield tunnel segment bolts.

In 2018, Anyang Railway Equipment Co., Ltd. provided M27 segment tunnel bolts, grade 8.8 hot-dip galvanizing to Xi’an Metro Line 6

DZIII Railway Rail Fastening System Produced by Anyang Railway Equipment Co., Ltd are popular used in China, such as Chengdu Metro 3, Chengdu Metro 6, Chengdu Metro 8, Chengdu Metro 10, Chengdu Metro 11, Chengdu Metro 13, Chengdu Metro 19, Chengdu Metro 30, Dongguan Metro 1, Guiyang Metro 1, Guiyang Metro 2, etc.

In 2016, Anyang Railway Equipment Co., Ltd. provided P60 railway fishplates, M24*135mm fishbolts with cap, 9*26mm single-coil spring washer, P50 railway fishplate, M24*145mm fishbolts with cap,φ32mm insulated gauge rod, 60kg/m rail pin type anti-climbing device to the III phase project to Shanghai Metro Line 9. 

Type DTVI-2 Track Fastening Systems are composed of iron base plates, tension clamps, rubber rail plates I, rubber rail plates II, gauge insulators, screw spikes, heavy spring washers, and nylon sleeves. In addition, in order to adjust the height of the rail, the height adjustment pad is necessary.

Type DTVI-2 Track Fastening Systems are composed of iron base plates, tension clamps, rubber rail plates I, rubber rail plates II, gauge insulators, screw spikes, heavy spring washers, and nylon sleeves. In addition, in order to adjust the height of the rail, the height adjustment pad is necessary.

From 2019 to 2020, Anyang Railway Equipment Co., Ltd. provided 60kg/m railway fishplates(rail joint bars), fishbolts with nuts and plum-shaped washers to Shanghai Metro Line 18.

In 2022, Anyang Railway Equipment Co., Ltd. provided 80,360 pieces of Type II rail elastic clips for the Shanghai-Kunming Railway to enhance the quality of equipment and ensure the safety of passenger and freight transportation.

Anyang Railway Equipment Co., Ltd. provided 60kg/m rail joint splint and 50kg/m rail joint splints to Suzhou Rail Transit S1 line in 2021.

In 2014, Anyang Railway Equipment Co., Ltd(AT) provided 60kg/m railway rail fastening material (including frozen joint splints, high-strength washers, M27 high-strength nuts, M27*160 high-strength bolts) to Wuxi Metro Line 2.

In 2018, Anyang Railway Equipment Co., Ltd(AT) provided M30 Tunnel Segment Bolts for Fuzhou Metro Line 5.

In 2020, Anyang Railway Equipment Co., Ltd. provided regular rail joint bars(railway fishplates) for P50 and P60 steel rails to Foshan Metro Line 3.

In 2021, Anyang Railway Equipment Co., Ltd(AT) provided M24 Tunnel Segment Bolts for Shenyang Metro Line 4.

Anyang Railway Equipment Co., Ltd provided P60 regular rail joint bars, P60 compromise joint bars, and Fishbolts for P60 steel rails for Shenzhen Metro Line 10.

In December 2021, Anyang Railway Equipment Co., Ltd. provided various railway rail fastening products(DT-Ⅲ Rail Fastening System, DT-Ⅲ Low Resistance Rail Fastening System, DJK5-1 Rail Fastening System, Type-I Rail Fastening System, WJ-2A Rail Fastening System) to the first phase of Guiyang Rail Transit Line 3.

In 2018, Anyang Railway Equipment Co., Ltd. provided ordinary rail fishplates (for 50kg/m and 60kg/m steel rails) and insulating gauge tie rods to Hefei Metro Line 5.

Type DTVI-2 Track Fastening Systems are composed of iron base plates, tension clamps, rubber rail plates I, rubber rail plates II, gauge insulators, screw spikes, heavy spring washers, and nylon sleeves. In addition, in order to adjust the height of the rail, the height adjustment pad is necessary.

Anyang Railway Equipment Co., Ltd. supplied cast-iron tie plates and distance-adjusting clamps for railway rail fastening systems to Changsha Rail Transit Line 3, all of which are made of QT450-10.

In 2016, Anyang Railway Equipment Co., Ltd(AT) provided P50 and P60 rail joint splice bars (including railway track bolts, nuts and washers), and high-strength frozen joint splice bars (including railway track bolts, nuts and washers) for the first phase project of Nanjing Metro Line S3 ).

Type DTVI-2 Track Fastening Systems are composed of iron base plates, tension clamps, rubber rail plates I, rubber rail plates II, gauge insulators, screw spikes, heavy spring washers, and nylon sleeves. In addition, in order to adjust the height of the rail, the height adjustment pad is necessary.

Type DTVI-2 Track Fastening Systems are composed of iron base plates, tension clamps, rubber rail plates I, rubber rail plates II, gauge insulators, screw spikes, heavy spring washers, and nylon sleeves. In addition, in order to adjust the height of the rail, the height adjustment pad is necessary.

In 2019, Anyang Railway Equipment Co., Ltd. provided 61,000 sets of DTVI2-type railroad track fastener assemblies, 1,500 sets of railroad track fastener assemblies for integral ballast bed, 3520 sets of P60 rail I-type elastic clip track fastener assemblies, 6150 sets of P50 rail I-type track fastener assemblies, 450 sets of elastic I-type elastic clip track fastener assemblies without separation to Suzhou Rail Transit Line 5.