Insulated Fishplates and Standard Fishplates Manufacturer for Wuhan Metro

In 2021, Anyang Railway Equipment Co., Ltd. provided Guangzhou Metro Line 11 with 950 sets of damping joint bars for 50kg/m rail, 40 sets of damping joint bars for 60kg/m rail, and 60 sets of regular joint bars for 50kg /m rail and 1036 sets of regular joint bars for 60kg/m rail.

In 2021, Anyang Railway Equipment Co., Ltd. provided Shanghai Railway Group Co., Ltd with a total of 14,220 pcs of railroad fishplates, including 120 pieces of 43kg/m rail regular railroad fishplates, 7000 pcs of 50kg/m rail regular railroad fishplates, and 7100 pcs of 60kg/m rail regular railroad fishplates used for the maintenance of rails.

In 2021, Anyang Railway Equipment Co., Ltd. provided 14,685 pieces of railroad track joint bars to China Railway Beijing Bureau Group Co., Ltd, including regular joint bars and rail insulated joint bars for 43kg/m,50kg/m, and 60kg/m rails, as well as compromise joint bars for 43-50kg/m, 50-60kg/m, 60-75kg/m rail.

In 2022, Anyang Railway Equipment Co., Ltd. supplied 11141 sets of guard rail fastening systems and 45 sets of cast guard rail spindles to Jiangnao Railway.

Anyang Railway Equipment Co., Ltd. provided 5,155 sets of Type II Rail Fastening System to Baocheng Line K227 geological disaster remediation and rerouting project in 2021. Each set of Type II Rail Fastening System includes screw spikes, rail clips, nuts, washers, gauge baffle plates, rubber pads, nylon baffle seats, etc.

In 2018, Anyang Railway Equipment Co., Ltd. provided a total of 145,200 sets of M24 segment tunnel bolts to Foshan Metro Line 3.

A rail joint typically is one of the weakest elements of a track superstructure, primarily because of discontinuities in its geometric and mechanical properties and the high-impact loads induced by these discontinuities.

In 2021, Anyang Railway Equipment Co., Ltd. provided ordinary fishplates and insulating joint splints, rubber pads used under rail, A-type rail tension clips, B-type rail tension clips to Qujing Works Section of China Railway Kunming Bureau Group Co., Ltd.

 In 2020, Anyang Railway Equipment Co., Ltd. provided 35,300 sets of DTVI-2 type track fastener assembly (including rail tension clips, anchor bolts, flat washers, single coil spring washers, iron tie plates, etc.) to Xi’an Metro Line 14.

In 2022, Anyang Railway Equipment Co., Ltd supplied 444,297 pieces of under-rail rubber pads (10*149*190mm, 10*149*185mm, 10*149*190mm) to Daqin Railway.

In 2022, Anyang Railway Equipment Co., Ltd provided Rail Joint Bars, Joint Bolts, Nuts, Rail Fastening Systems, and Spindles to Liugou-Hongshaliang Railway.

In 2024, Anyang Railway Equipment Co., Ltd（AT）provided rail clamps, rubber pad, clamp seat for the small-resistance fastening systems to Hohhot Railway Bureau Hohhot Public Works Section.

In 2024, Anyang Railway Equipment Co., Ltd. provided 60,000 sets of Type III split fastening systems to the Xi’an Metro Line 15 track laying project.

In 2021, Anyang Railway Equipment Co., Ltd. provided P60 railway rail joint bars, P50 railway rail joint bars, P50 track fastener assemblies, P50 track fastener assemblies for guard rail and spindles, turnout spindles to the newly constructed Jingye Group Railway Special Line.

Prefabricated track construction technology are carried out by 5 steps.

In 2021, Anyang Railway Equipment Co., Ltd(AT) provided M24*1250mm gauge tie rods, M22*135 fisbolts (strength grade 8.8), and 790*92*20mm railway rail fishplates for Dali-Ruili Railway.

Anyang Railway Equipment Co., Ltd. provided Heavy-Load Rail Fastening System, Guard Rail Fastening Systems, Joint Bars, Guard Rail Spindles, Nylon Insulator, Plastic Dowel, Spring Washer, etc for Haoji Railway.

In 2018, Anyang Railway Equipment Co., Ltd. provided Changsha Rail Transit Line 5 with Type III spring clip fastening system (including cast iron pads, adjustable gauge buckle plates, screw spikes, type III spring clips, heavy spring washers, flat Washers, under-rail rubber pads, under-plate steel pads, 8# gauge insulator, 10# gauge insulator, nylon sleeve).

In 2020, Anyang Railway Equipment Co., Ltd(AT) provided Shield Tunnel Segment bolts for Shenyang Metro Line 4.

In 2018, Anyang Railway Equipment Co., Ltd(AT). provided 37,054 sets of Type III divided railway fastening system to Changsha Rail Transit Line 5.

In 2018, Anyang Railway Equipment Co., Ltd. provided ordinary rail fishplates (for 50kg/m and 60kg/m steel rails) and insulating gauge tie rods to Hefei Metro Line 5.

In 2016, Anyang Railway Equipment provided 50kg Type I Railway Fastener System (adopted TB/T1495 “Type I Fastening System” standard) and 60kg Type I Railway Fastener System (adopted TB/T1495 “Type I Fastening System” standard),60kg Type II Railway Fastener System (using TBT/3065-2001 and TB/T1495 “Type II Fastening System” standard), 60kg Type III Railway Fastener System (technical requirements of railway rail clips fastening system for Special Line (01) 3328).

In 2018, Anyang Railway Equipment Co., Ltd. provided Type III split railway fastener assembly, Type I split railway fastener assembly,  Type I railway fastener assembly, Type II inspection pit fastening system, DJK5-1 fastening system, 60kg/m ordinary rail joint bars, 60kg/m frozen rail joint bars, 50kg/m non-working side shock-absorbing rail joint bars, 60kg/m non-working side shock-absorbing rail joint bars, bulging fishplates. to Zhengzhou Metro.

In 2020, Anyang Railway Equipment Co., Ltd. provided 57,623 pcs of iron pads for WJ-2A railway track fastener system, 115,246 pcs of flat pads for WJ-2A railway track fastener system, 1,024 pcs of iron pads for DTIII2-A railway track fastener system, and 39,576 pcs flat spacer for WJ- 2A railway track fastener system and 2048 pcs of tooth spacer for DTIII-2A railway track fastener system to Wuhan Metro Line 16.

In 2019, Anyang Railway Equipment Co., Ltd. provided rail joint splints, joint bolts with caps, spring washers, I-type rail spring clip assemblies, insulating joint bars, insulating joint bolts with caps, and insulating spring washers to Handan-Huangzhou Railway.

In 2021, Anyang Railway Equipment Co., Ltd. provided 35,380 sets of 50kg/m Type-I rail elastic clip fastening system and 100 sets of 60kg/m Type-II rail elastic clip fastening system to the special line project of Dongying Mingsheng Railway Logistics Park.

In 2016, Anyang Railway Equipment Co., Ltd. provided 50kg Type I Fastening System, 60kg ballastless transition Auxiliary rail fasteners, rail fastener, 60kg Type II Fastening System, a total of 126,334 sets of railway fastener systems to the Beijing-Shenyang railway passenger dedicated line.

In 2022, Anyang Railway Equipment Co., Ltd. provided 620 sets of joint bars for 60kg/m railway rails and 895 sets of joint bars for 50kg/m railway rails to Guangzhou Metro Line 12.

In 2024, Anyang Railway Equipment Co., Ltd. provided Yangshe Railway Co., Ltd. with type IIIa concrete sleepers and accessories and 60kg rail spare parts for overhaul

In 2019, Anyang Railway Equipment Co., Ltd provided including T30*150 screw spikes, φ30 plain washer, φ30 heavy-duty spring washers, screw spikes, nuts, DJK5-1 rail fastening system, 14#, 20#, 63, 10# gauge baffle plates, A-type rail clips, B-type rail clips, etc various rail fasteners to Suzhou Metro Line 3.