Rail Fastener System, Spindles for the Guare Rail Wheel for Qning Railway

In 2017, Anyang Railway Equipment Co., Ltd(AT) provided 50kg/m sleeper fittings (joint splint,  high-strength track bolt with grade 8.8, grade 10 high-strength nut with grade 10, single coil spring washer) and 60kg/m sleeper fittings (joint splint, Grade 10.9 high-strength bolts, grade 10 high-strength nuts, high-strength flat washers) for Huangda Railway.

In 2018, Anyang Railway Equipment Co., Ltd provided kinds of Screw Spikes, Nuts, Washers, Fishplates, Joint Bolts, Gauge Baffles, Gauge Tie Rods for Qinghai-Tibet Railway

Anyang Railway Equipment Co., Ltd. provided 5,155 sets of Type II Rail Fastening System to Baocheng Line K227 geological disaster remediation and rerouting project in 2021. Each set of Type II Rail Fastening System includes screw spikes, rail clips, nuts, washers, gauge baffle plates, rubber pads, nylon baffle seats, etc.

In 2020, Anyang Railway Equipment Co., Ltd. provided 93,246 pcs rubber pads of rail fastening system used under track to Daqin Railway.

From 2018 to 2021, Anyang Railway Equipment Co., Ltd. provided 1,108,532 sets of 60kg Type II ordinary railway fastening systems, 263,892 sets of 50kg Type I ordinary railway fastening systems, and 60kg ballastless transition section auxiliary to the East Ring Road of Chongqing Railway Hub Rail fasteners, a total of 157316 sets of the rail fastener assembly.

In 2022, Anyang Railway Equipment Co., Ltd. supplied 85,132 pieces of I-type rail tension clips, ZX-2 type tension clips, II-type tension clips, and I-type inspection pit rail clips to Tianjin Rail Transit Line 4 in 2022. and 225,415 rubber plates.

In 2021, Anyang Railway Equipment Co., Ltd. provided 100,000 pieces of 10×149×185 rubber pads used for under-track, 3,144 sets of M24×135 high-strength joint bolts and nuts, and 3,144 pieces of single-coil spring washers to China Railway Urumqi Bureau Group Co., Ltd. 

In 2016, Anyang Railway Equipment Co., Ltd. provided 50kg I-type rail fastener system (according to TB/T 1495 standard), 60kg II-type rail fastener system (according to special line 3351), 60kg III-type rail fastener system for the electrification reconstruction project of Wuhu-Guangde Railway (according to the dedicated line (01) 3328).

In 2016, Anyang Railway Equipment provided 50kg Type I Railway Fastener System (adopted TB/T1495 “Type I Fastening System” standard) and 60kg Type I Railway Fastener System (adopted TB/T1495 “Type I Fastening System” standard),60kg Type II Railway Fastener System (using TBT/3065-2001 and TB/T1495 “Type II Fastening System” standard), 60kg Type III Railway Fastener System (technical requirements of railway rail clips fastening system for Special Line (01) 3328).

In 2019, Anyang Railway Equipment Co., Ltd. provided rail joint splints, joint bolts with caps, spring washers, I-type rail spring clip assemblies, insulating joint bars, insulating joint bolts with caps, and insulating spring washers to Handan-Huangzhou Railway.

In 2017, Anyang Railway Equipment Co., Ltd(AT) provided P50 and P60 common rail fishplates, bonded insulating gauge rods, single coil spring washers, insulating joint bolts and nuts for China Railway Urumqi Bureau Group Co., Ltd.

In 2017, Anyang Railway Equipment Co., Ltd. provided 53,108 sets of 60kg Type II rail clip fastening system and 60kg ballastless transition section auxiliary rail fastening system to the Jiqing high-speed railway.

Anyang Railway Equipment Co., Ltd. provided Haoji Railway with 18,000 pieces of 50kg/m railway rail fishplates, 54,000 sets of 24*145 fishbolts and 54,000 pcs of M24 single coil spring washers,

In 2014, Anyang Railway Equipment Co., Ltd(AT) provided 60-50kg/m rail special-shaped rail joint fittings(railway fishplates, joint bolts, nuts, spring washers), 50kg/m and 60kg/m ordinary rail joint fittings and rail guard fittings to Tianjin-Baoding Railway.

In 2017, Anyang Railway Equipment Co., Ltd(AT) provided 50kg/m and 60kg/m rail fishplates and M24*135 bolts to Nanping-Longyan Railway.

From 2020 to 2021, Anyang Railway Equipment Co., Ltd. will provide 183,370 sets of P50 guard rail fasteners to Xingquan Railway (Ningquan Section).

During 2019-2021, Anyang Railway Equipment Co., Ltd. provided China-Laos Railway with 848,262 sets of type II rail fastening system for 60kg/m steel rail (used in general area), 153,345 sets of special rail fastening system for wheel guard rails (according to the design drawings of special line 3448), and 120,322 sets of type I rail fastening system (used in acid area ), 73 tons of bridge pier hanging fence (including angle steel, backing plate, M20 bolts, M16 nuts), 2000 pieces of P60 rail joints.

In 2020, Anyang Railway Equipment Co., Ltd. provided Nanlong Railway with a combination of 50kg/m rail joint splint and M24*145 rail bolts (intensity grade 8.8) with ut, φ24 single coil spring washers and 50kg/m ordinary insulation rail joints (each set of insulation rail joint combination includes 2 insulation joint bars, 6 sets of rail bolts with nuts, 6 pcs of single-coil spring washer, 12 pcs of flat washers, etc).

Anyang Railway Equipment Co., Ltd provided P50 rail clip fastening systems, guard rail fasteners, bridge sleeper guard rail fasteners, spindles, and other railway equipment for Nariobi-Malaba Railway Project in Kenya.

In 2016, Anyang Railway Equipment Co., Ltd. provided 50kg Type I Fastening System, 60kg ballastless transition Auxiliary rail fasteners, rail fastener, 60kg Type II Fastening System, a total of 126,334 sets of railway fastener systems to the Beijing-Shenyang railway passenger dedicated line.

In 2016, Anyang Railway Equipment Co., Ltd（AT）provided 43kg/km, 50kg/km, 60kg/km common joint fishplate and insulating joint fishplate and 60kg/km rail broken emergency splice bars (expansion splint), 43-50kg/km and 50-60kg/km special-shaped joint splint to China Railway Wuhan Bureau Group Co., Ltd.

in 2020, Anyang Railway Equipment Co., Ltd. provided 129,578 sets of rail fastener system for the guard rail wheel, 266 sets of spindles and accessories for the guard rail wheel to Quning Railway.

In 2021, Anyang Railway Equipment Co., Ltd. provided 35,380 sets of 50kg/m Type-I rail elastic clip fastening system and 100 sets of 60kg/m Type-II rail elastic clip fastening system to the special line project of Dongying Mingsheng Railway Logistics Park.

In 2021, Anyang Railway Equipment Co., Ltd. provided 24,282 sets of I-type rail clip fastening assembly, 31,870 sets of P50 gusset-type fastening assembly(dedicated line 3348-II guard rail fasteners), and 3,312 sets of P50 gusset-type track fastener assembly, 1640 sets of P50 railway rail fishplates, 20 pieces of railway spindles, 230 sets of fastening assembly for railway spindles to the coal logistics base project of Sanyang Logistics Industrial Park.

In 2021, Anyang Railway Equipment Co., Ltd(AT) provided M24*1250mm gauge tie rods, M22*135 fisbolts (strength grade 8.8), and 790*92*20mm railway rail fishplates for Dali-Ruili Railway.

In 2017, Anyang Railway Equipment Co., Ltd(AT) provided P60 type III sleeper fastening accessories, P50 sleeper fastening accessories, rail fastening accessories on the bridge, rail tie rods to Xuyu Railway.

Anyang Railway Equipment Co., Ltd. has been providing railway fastening products such as rail tension clamps(rail clip), screw spikes, gauge baffles, nylon baffle seats, and under-rail rubber pads for the railway reconstruction project of Fangchenggang Station.

In 2017, Anyang Railway Equipment Co., Ltd. provided 50kg and 60kg Type I Fastening System, 60kg Type II Fastening System, 60kg Type III low-resistance elastic railway fastener assembly, new type III 50kg guard rail fastening system to the Shugang Railway in Dongjiakou Port Area requirements), a total of 230,476 sets of fastener systems.

In 2018, Anyang Railway Equipment Co., Ltd(AT) provided P50 and P60 rail joint splints(railway fishplates) to Jingshen Railway.

From 2020-2021, Anyang Railway Equipment Co., Ltd. provided 108,196 sets of Type-II rail clip fastening system and Type-III rail clip fastening system used for 60kg/m steel rail to the repair and safety reinforcement of the equipment safety reinforcement project of the Wujiang Line.