railroad track fasteners manufacturer

In 2022, Anyang Railway Equipment Co., Ltd. provided 151,364 sets of DZⅢ-type fastening systems (for 60kg/m rail) and 24,785 sets of DZⅢ-3  fastening systems (for 60kg/m rails), 20291 sets of I-type railway fastening systems(for 50kg/m rail), 4271 sets of II-type railway fastening systems (for 60kg/m rail), 1691 sets of CZ-1 fastening systems (for 50kg/m rail) rail).

The track laying method, it can be divided into two types: manual track laying and mechanical track laying, including three links of rail assembly, transportation, and laying.

In 2021, Anyang Railway Equipment Co., Ltd. provided 24,282 sets of I-type rail clip fastening assembly, 31,870 sets of P50 gusset-type fastening assembly(dedicated line 3348-II guard rail fasteners), and 3,312 sets of P50 gusset-type track fastener assembly, 1640 sets of P50 railway rail fishplates, 20 pieces of railway spindles, 230 sets of fastening assembly for railway spindles to the coal logistics base project of Sanyang Logistics Industrial Park.

In 2022, Anyang Railway Equipment Co., Ltd. has been providing embedded U-bolts, ballast steel plates, tie plates, etc for the capacity expansion and reconstruction project of the Emei-Miyi section of the Chengdu-Kunming Railway.

In 2021, Anyang Railway Equipment Co., Ltd. provided 3080 sets of type I clip fastener assembly for 50kg/m rail and 6098 sets of type II clip fastener assembly for 60kg/m rail for the reconstruction project of the Harbin-Jiamusi Wangsun Uplink Super Bridge.

In 2019, Anyang Railway Equipment Co., Ltd. provided 61,000 sets of DTVI2-type railroad track fastener assemblies, 1,500 sets of railroad track fastener assemblies for integral ballast bed, 3520 sets of P60 rail I-type elastic clip track fastener assemblies, 6150 sets of P50 rail I-type track fastener assemblies, 450 sets of elastic I-type elastic clip track fastener assemblies without separation to Suzhou Rail Transit Line 5.

In 2019, Anyang Railway Equipment Co., Ltd. provided 10,214 sets of P60 improved I-type rail fastener systems, 5,652 sets of P50 I-type rail fastener systems, and 7,572 sets of P50 I-type separate rail fastener systems for the Tianshui tram project.

In 2017, Anyang Railway Equipment Co., Ltd(AT) provided P60 type III sleeper fastening accessories, P50 sleeper fastening accessories, rail fastening accessories on the bridge, rail tie rods to Xuyu Railway.

Rail shoulder are semi-embedded in the concrete rail ties to fix the elastic rail clips to the tie plates. Anyang Railway Equipment Co., Ltd is a professional Manufacturer of Cast-in Railway Shoulders, Rail Shoulders from China

Railway Casting Shoulder, also called Railway Anchor, is casting parts and semi-embedded in the concrete rail ties to fix the elastic rail clips to the tie plates. Anyang Railway Equipment Co., Ltd is a professional Manufacturer of Cast-in Railway Shoulders, Rail Shoulders from China.

Anyang Railway Equipment Co., Ltd is a leading manufacturer and supplier from China that provides various railway rail fastening systems for conventional railway and heavy-load railway, metro, subway, as well as high-speed railways. Besides, it provides various railroad track fasteners, such as rail clips, railway fish plates, rail pads, anchors, rail bolts, rail spikes, rubber pads, plastic pads, nylon pads, railway castings, etc

Anyang Railway Equipment Co., Ltd(AT) is a professional manufacturer and supplier of various kinds of railway fastening systems, with clip I, clip II, and clip III as our most popular products, we also offer other types of spring clips like E-type clips, high-speed railway clips, SKL rail clips, Russia rail clips, Korea clips, spring blade, etc.

As a professional manufacturer and supplier of Railroad Custom Track Bolts – Anchor Bolts – Railway Fasteners, Anyang Railway Equipment Co., Ltd can offer various kinds of track bolts, fish bolts, anchor bolts with high quality and reasonable prices.

The track nuts and flat washers or spring washers are necessary fastening products for railway joint bars, iron tie plates, railway clamps and track clips.

The track nuts and flat washers or spring washers are necessary fastening products for railway joint bars, iron tie plates, railway clamps and track clips.

Compared with rail transportation such as national railways and subways, trams have relatively slower speeds and lighter axle loads; the line conditions are complex, the right of way is unclear, and the radius of the tram is relatively small. Its fasteners strive to be simple, have moderate buckling pressure, have good elasticity, have strong adaptability, have low cost, and should be versatile and interchangeable, and easy to install and maintain. And meet the requirements of insulation and vibration reduction. The AL series fasteners are developed based on the above requirements. Tram Rail Fastening Systems use general-purpose type II elastic clips as fasteners, general-purpose spikes, general-purpose casings, and gauge blocks.

Compared with rail transportation such as national railways and subways, trams have relatively slower speeds and lighter axle loads; the line conditions are complex, the right of way is unclear, and the radius of the tram is relatively small. Its fasteners strive to be simple, have moderate buckling pressure, have good elasticity, have strong adaptability, have low cost, and should be versatile and interchangeable, and easy to install and maintain. And meet the requirements of insulation and vibration reduction. The AL series fasteners are developed based on the above requirements. Tram Rail Fastening Systems use general-purpose type II elastic clips as fasteners, general-purpose spikes, general-purpose casings, and gauge blocks.

Tram Track Fastening Systems with sleepers adopt universal type II elastic clips as fastening parts, universal spikes, universal casings, and gauge blocks. It can be cast on the track bed with short sleepers, long sleepers, and double-block sleepers. It can be used in special areas where construction period and precision are required. At the same time, it also has good flexibility, 20mm gauge adjustment and 20mm height adjustment can well adapt to complex line conditions and environmental requirements.

The Type VI track fastening systems for MRT are suitable for laying 75 kg/m steel rails and pre-stressed concrete sleepers with shoulders on heavy-duty freight ballasted tracks.

The Type VI track fastening systems for MRT are suitable for laying 75 kg/m steel rails and pre-stressed concrete sleepers with shoulders on heavy-duty freight ballasted tracks.

Type DTVI-2 Track Fastening Systems are composed of iron base plates, tension clamps, rubber rail plates I, rubber rail plates II, gauge insulators, screw spikes, heavy spring washers, and nylon sleeves. In addition, in order to adjust the height of the rail, the height adjustment pad is necessary.

Type DTVI-2 Track Fastening Systems are composed of iron base plates, tension clamps, rubber rail plates I, rubber rail plates II, gauge insulators, screw spikes,heavy spring washers and nylon sleeves. In addition, in order to adjust the height of the rail, the height adjustment pad is necessary.

V Rail Fastening Systems for High-Speed Railway is an elastic track fastener designed to adapt to the laying of prestressed concrete ballasted tracks with shoulder sleepers and to meet the technical requirements of the passenger dedicated line fastener system.

V Rail Fastening Systems for High-Speed Railway is an elastic track fastener designed to adapt to the laying of prestressed concrete ballasted tracks with shoulder sleepers and to meet the technical requirements of the passenger dedicated line fastener system.

WJ-8 Rail Fastening Systems is a kind of rail fastener for high-speed railway, which is composed of screw spikes, flat washers, rail clips, insulators, gauge baffles, under-rail pads, base plates, resilient pads, nylon dowels, etc.

WJ-8 Track Fastening Systems is a kind of rail fastener for high-speed railway, which is composed of screw spikes, flat washers, rail clips, insulators, gauge baffles, under-rail pads, base plates, resilient pads, nylon dowels, etc.

Guard rails are divided into five types: bridge guard rails, crossing guard rails, turnout guard rails, curved anti-wear protect rails, and curved anti-off-line protect rails.

Guard rails are divided into five types: bridge protect rails, crossing guard rails, turnout guard rails, curved anti-wear protect rails, and curved anti-off-line protect rails.

FastClip Track Fastening systems is suitable for use with all forms of pre-cast elements, including monoblock, independent blocks, and slab panels. Pre-cast elements may be cast-in or resiliently mounted.
The Fast clip rail fastening system can be delivered to the site fully pre-assembled (captive) on pre-cast concrete elements.

The I-type rail clip fastener has good elasticity and small pressure loss, and can maintain the geometric position of the crawler well. It has become the main clip fasteners of China’s concrete sleeper production line.